Rubber Gloves
Skarshaug Testing Laboratory is a distributor of electrical safety products. All electrical safety gear is tested and date-stamped prior to shipment and the material will include a certified report.
Rubber insulating gloves are among the most important articles of personal protection for electrical workers. Incorporating high dielectric and physical strength, flexibility and durability, Salisbury rubber insulating gloves have earned the reputation for superior performance meeting and exceeding the requirements of current ASTM D120 specifications and IEC EN6090. We carry rubber gloves and sleeves manufactured by Salisbury by Honeywell (Made in USA) and Novax as well as Chance-Hubbell rubber gloves.
Please see our main offerings, below, listed by category. For questions, price & availability, or needing to place an order please call us at 515-292-1422 or email us at info@skarshaug.com.
Glove Classification
Rubber insulating gloves are available in six ASTM defined voltage classes from class 00 through class 4. Rubber dipped sleeves are available in Class 0 through 4. The chart identifies the class, proof test voltage and maximum allowable exposure voltage. Each glove manufactured to ASTM D120 has a color-coded label with the size, class and corresponding color for the glove class.
Our lab tests all rubber gloves for the AC-rated voltage for 1.5 minutes for recertification and 3 minutes for brand new gloves.
Leather Protectors
Per OSHA requirements, leather protectors are worn on the outside the rubber gloves to protect the rubber. Rubber gloves are sometimes referred to as a "liner" for this reason. Protectors are sized to the corresponding glove size (i.e. Size 10 to Size 10). Protectors are required to be shorter than the rubber gloves by a minimum distance depending on the glove class: Class 00 and 0 is 0.5"; Class 1 is 1"; Class 2 is 2"; Class 3 is 3"; Class 4 is 4".
Glove Hand Sizing
Rubber gloves are sized according to the circumference of the palm in inches. Measure around the palm (excluding the thumb) and add 1-inch to allow additional room. Most rubber gloves are available in size 7 through 12 including half sizes. Half sizes are indicated with an "H" at the end of the part number.
Glove Kits
We sell standard glove kits with the rubber gloves, leather protectors and storage bags. The leather protectors are selected to the correct size and length for the selected rubber glove. Storage bags are a good method for storing rubber gloves when they are not being used. It is recommend gloves are also stored in a cool and dry environment for proper care.
Low Voltage Glove Options
Low Voltage gloves include Class 00 and Class 0 ratings with maximum usage at 500 V-AC and 1000 V-AC, respectively.
Salisbury gloves, our main offering, has part numbers displayed by the voltage, glove length, color, and size. For example, part number PE011Y.10 is a class 0, 11", yellow, and size 10. Low voltage gloves are available in 11" and 14" lengths; colors black, red, yellow, synthetic blue; and sizes 7 through 12 including half-sizes (designated by an "H" after the size).
Rubber Gloves Class 00
Rubber Gloves Class 0
High Voltage Glove Options
High Voltage gloves include Class 1, 2, 3, and 4. Gloves are available in either black or two-color options with black on the outside and an alternating inside color. Salisbury gloves, our main offering, has part numbers are displayed by the voltage, glove length, style, color, and size. For example, part number PNG216YB.10 is a class 2, 16", standard straight cuff, yellow/black, and size 10.
Class 1 gloves are available in 14" and 16" lengths; colors black, red/black, yellow/black; and sizes 7 through 12 including half-sizes (designated by an "H" after the size).
Class 2 and Class 3 gloves are available in 14", 16", and 18" lengths; colors black, red/black, yellow/black; standard straight cuff, bell cuff, and contour cuff; and sizes 7 through 12 including half-sizes (designated by an "H" after the size).
Class 4 gloves are available in 16" and 18" lengths; colors black, red/black, yellow/black; standard straight cuff, bell cuff, and contour cuff; and sizes 8 through 12 including half-sizes (designated by an "H" after the size).
.jpg)
Rubber Gloves Class 1
Rubber Gloves Class 2
Rubber Gloves Class 3
Rubber Gloves Class 4
Three-Finger Mittens
High Voltage three-finger mittens are available in Class 2 and 3. The mittens include a thumb and trigger-finger.
Salisbury mittens has part numbers are displayed by "M" for mitten, the voltage, glove length, style, color, and size. For example, part number PNGM214BCYB.10 is a mitt, class 2, 14", bell cuff, yellow/black, and size 10. Options are limited for the mittens in color, cuff style and sizes. Color options are red/black and yellow/black; only available in bell cuff; and only comes in sizes 9, 10, and 11.
.jpg)
Rubber Mittens Class 2
Low Voltage Leather Protectors
Skarshaug Testing Lab offers Kunz and Salisbury leather protectors. Our standard glove kits come with an appropriate length Kunz protector. Kunz protectors are hand-made in the USA with high-quality leather. The low voltage Kunz protectors include the 910GPR (Class 00), 999PR (Class 0), 999SPR (Class 0 with pull-strap) and the 913PR (LV 14" rubber gloves). All are made with pearl goatskin leather. The low voltage Salisbury protectors are imported and made of goatskin leather. Salisbury protectors are dual-sized, so "size 10" is made to fit both size 10 and 10.5.
Note: It is the responsibility of the purchaser to specify the overall length of the protector gloves. Please see the notes from earlier about the minimum distance which shall be allowed between the protector glove cuff and the bead of the rubber glove per ASTM F496 Specifications.
.jpg)
Leather Protectors LV
High Voltage Leather Protectors
Skarshaug Testing Lab offers Kunz and Salisbury leather protectors. These protectors come in a variety of lengths and types of leather depending on user preference. The Kunz leather options include: pearl goatskin (#1200), tan goatskin (#1005), buffed cowhide (#1007), tan cowhide (#1057), cream cowhide (#1050), and buckskin (#1002). See Kunz for more product information about the benefits of each type of leather.
Note: It is the responsibility of the purchaser to specify the overall length of the protector gloves. Please see the notes from earlier about the minimum distance which shall be allowed between the protector glove cuff and the bead of the rubber glove per ASTM F496 Specifications.
